| System |
|
Form Factor |
2U Rackmount |
|
Chassis Model |
TN70E |
|
Dimension (D x W x H) |
27.56" x 17.72" x 3.43" (700 x 450 x 87mm) |
|
Motherboard Name |
S8026GM2NRE |
|
Gross Weight |
30 kg (66 lbs) |
|
Net weight |
19 kg (42 lbs) |
| Front Panel |
|
Buttons |
(1) RST / (1) PWR w/ LED / (1) UID |
|
LEDs |
(1) ID / (1) System Event |
|
I/O Ports |
(2) USB 2.0 ports |
| External Drive Bay |
|
Q'ty / Type |
(8) 3.5"/2.5" Hot-Swap SSD/HDD + (4) NVMe |
|
HDD Backplane Support |
NVMe / SATA 6.0Gb/s |
|
Supported HDD Interface |
(8) SATA 6Gb/s + (4) NVMe |
| Internal Drive Bay |
|
Type / Q'ty |
(2) 2.5" Hot-swap HDD/SSDs |
|
Supported HDD Interface |
(2) SATA 6Gb/s |
| System Cooling Configuration |
|
FAN |
(8) 6cm fans |
| Power Supply |
|
Type |
RPSU |
|
Input Range |
AC 100-127V/10A / AC 200-240V/5A |
|
Frequency |
50-60 Hz |
|
Output Watts |
770 Watts |
|
Efficiency |
80 plus Platinum |
|
Redundancy |
1+1 |
| Processor |
|
Q'ty / Socket Type |
(1) AMD Socket SP3 |
|
Supported CPU Series |
(1) AMD EPYC™ 7000 Series Processor |
|
System Bus |
1066/ 800/ 533 MHz |
|
Average CPU Power (ACP) Wattage |
Max up to 180W |
| Memory |
|
Supported DIMM Qty |
(16) DIMM slots |
|
DIMM Type / Speed |
DDR4 ECC RDIMM/LRDIMM 2666/2400 |
|
Capacity |
Up to 1,024GB RDIMM/LRDIMM |
|
Memory channel |
8 Channels per CPU |
|
Memory voltage |
1.2V |
| Expansion Slots |
|
PCI-E |
*Without using OCP 2.0 Mezz card, please contact with technical support for details. / (4) PCI-E Gen3 x8 slots (Full-height, Half-length) / (2) PCI-E Gen3 x8 slots (Half-height, Half-length w/ tall bracket) / (1) PCI-E Gen3 x16 OCP 2.0 slot (conn.A+conn.B) |
|
Pre-install TYAN Riser Card |
(1) M7106-L24-3F for (2) FH/HL PCI-E Gen3 x8 slots + (1) HH/HL PCI-E Gen3 x8 slot / (1) M7106-R24-3F for (2) FH/HL PCI-E Gen3 x8 slots + (1) HH/HL PCI-E Gen3 x8 slot |
| LAN |
|
Q'ty / Port |
(2) GbE ports, (1) PHY dedicated for IPMI |
|
Controller |
Broadcom BCM5720 |
|
PHY |
Realtek RTL8211E |
| Storage |
SATA |
Connector |
(2) SFF-8612 for (16) SATA ports |
| Controller |
Direct from AMD CPU |
| Speed |
12.0 Gb/s |
| RAID |
N/A |
| NVMe |
Connector (M.2) |
(2) 22110/2280/2260/2242 (by PCI-E & SATA interface) |
| Connector (OCuLink) |
(2) SFF-8612 for (4) NVMe ports |
| Graphic |
|
Connector type |
D-Sub 15-pin |
|
Resolution |
Up to 1920x1200 |
|
Chipset |
Aspeed AST2500 |
| I/O Ports |
|
USB |
(3) USB3.0 ports (2 at rear, 1 TYPE-A)/ (2) USB2.0 ports (2 at front) |
|
COM |
(1) DB-9 port (COM1) + (1) header (COM2) |
|
VGA |
(1) D-Sub 15-pin port |
|
RJ-45 |
(2) GbE ports, (1) GbE dedicated for IPMI |
| System Monitoring |
|
Chipset |
Aspeed AST2500 |
|
Temperature |
Monitors temperature for CPU & memory & system environment |
|
Voltage |
Monitors voltage for CPU, memory, chipset & power supply |
|
LED |
Over temperature warning indicator / Fan & PSU fail LED indicator |
|
Others |
Watchdog timer support |
| Server Management |
|
Onboard Chipset |
Onboard Aspeed AST2500 |
|
AST2500 iKVM Feature |
24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
|
AST2500 IPMI Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface |
| BIOS |
|
Brand / ROM size |
AMI / 32MB |
|
Feature |
Hardware Monitor / SMBIOS 3.0/PnP/Wake on LAN / Boot from USB device/PXE via LAN/Storage / Console Redirection / ACPI 6.1 / ACPI sleeping states S0,S1,S5 / FAN speed control automatic |
| Regulation |
|
FCC (DoC) |
Class A |
|
CE (DoC) |
Class A |
|
CB/LVD |
Yes |
|
RCM |
Class A |
|
VCCI |
Class A |
| Operating Environment |
|
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
|
Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
|
In/Non-operating Humidity |
90%, non-condensing at 35° C |
| RoHS |
|
RoHS 6/6 Compliant |
Yes |
